Manufacturing Engineer 3 - Job ID#203630
PDS Defense, Inc.
is seeking a Manufacturing Engineer 3, in Tukwila, WA.
Job Description:
Develops and implements production and tooling methodologies.
Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
Develops, identifies and implements conceptual designs and maintains the program architecture for build.
Leads and implements manufacturing plans.
Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements.
Assists in providing producibility information for inclusion in project plans and helps document producibility best practices.
Analyzes design/build concepts to evaluate producible design/build definitions.
Resolves technical problems of significant impact to performance, cost or schedule.
Coordinates and implements new engineering principles, theories, advanced technologies and concepts.
Validates and ensures production readiness of solutions to complex problems.
Implements lean principles and technologies.
The Flight Test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports fabrication planning and installation by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and support in the lab during the build/installation.
The primary focus of this position is the lead, manage and support of the design & fabrication efforts located in Tukwila, WA.
These efforts represent a wide variety of research and production programs primary in support of Boeing Commercial airplanes (BCA) and Boeing Defense, Space and Security (BDS) programs.
Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements.
Position
Responsibilities:
o Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
o Develops and documents BT&E ME process and tools for Flight test programs, new job practices, techniques and standards.
o Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
o Develops and plans manufacturing concepts and strategies to support business objectives.
o Prepares build analyses and cost estimate reports.
o Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
o Leads teams performing producibility assessments of design concepts.
o Manage the program work statement making sure it meets the cost and schedules.
o Leads development of complex work statements and sequencing of events to support delivery commitments.
o Lead and work with, test Project Management, Design Engineering, and Program IE to develop and maintain integrated build plan.
o Provide build plan and help develop schedule.
o Close coordination with Design engineers and fabrication personnel, Lead coordination with procurement/supplier management personnel across the Systems lab test team and the DB organization.
o Drafts, updates and reviews processes and procedures to support business requirements.
o Works under minimal direction.
o Collaborate with Supplier Management to establish Flight test integration requirements and opportunities.
o Lead the creation of training material and tutorials for Design Build ME team.
Basic Qualifications (Required Skills/Experience):
o Bachelor, Master or Doctorate of Science degree from accredited course of study, in engineering, computer science, mathematics, physics or Chemistry.
o 5 years of experience working in a production and/or manufacturing environment.
o 3 years of experience leading or managing projects and/or teams.
o 5 years of experience in a Manufacturing Engineering role.
Preferred Qualifications (Desired Skills/Experience):
o 3 years of experience working in a lab test, flight test, or similar test environmento Experience in support of commercial and military customers.
o Experience in Project managemento Boeing BCA/BDS/BT&E Manufacturing Engineering experience in Flight Test.
o Experience in ME and processes across multiple engineering disciplineso Experience with PDM, CAPP, CMES, MESci, EPARTs, GOLDesp PDS Defense, Incis committed to working with and providing reasonable accommodation to individuals with physical and mental disabilitiesIf you need special assistance or an accommodation while seeking employment, please call 1-866-224-2745 to contact usWe will make a determination on your request for reasonable accommodation on a case-by-case basis.
The law requires PDS Defense, Incto post a notice describing the Federal laws prohibiting job discriminationFor information regarding your legal rights and protections, please click on the following links:
EEO is the Law and EEO is the Law Supplement PDS Defense, Incwill not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own payPlease see the Pay Transparency Nondiscrimination Provision for more information.
As a Federal Contractor, PDS Defense, Incis required to participate in the E-Verify Program to confirm eligibility to work in the United StatesFor information, please click on the following link:
E-Verify.
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit https:
//www.
pdsdefense.
com/candidate-privacy/ Recommended Skills Assessments Business Planning Business Requirements Chemistry Engineering Hardworking And Dedicated Estimated Salary: $20 to $28 per hour based on qualifications.
is seeking a Manufacturing Engineer 3, in Tukwila, WA.
Job Description:
Develops and implements production and tooling methodologies.
Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
Develops, identifies and implements conceptual designs and maintains the program architecture for build.
Leads and implements manufacturing plans.
Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements.
Assists in providing producibility information for inclusion in project plans and helps document producibility best practices.
Analyzes design/build concepts to evaluate producible design/build definitions.
Resolves technical problems of significant impact to performance, cost or schedule.
Coordinates and implements new engineering principles, theories, advanced technologies and concepts.
Validates and ensures production readiness of solutions to complex problems.
Implements lean principles and technologies.
The Flight Test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports fabrication planning and installation by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and support in the lab during the build/installation.
The primary focus of this position is the lead, manage and support of the design & fabrication efforts located in Tukwila, WA.
These efforts represent a wide variety of research and production programs primary in support of Boeing Commercial airplanes (BCA) and Boeing Defense, Space and Security (BDS) programs.
Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements.
Position
Responsibilities:
o Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
o Develops and documents BT&E ME process and tools for Flight test programs, new job practices, techniques and standards.
o Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
o Develops and plans manufacturing concepts and strategies to support business objectives.
o Prepares build analyses and cost estimate reports.
o Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
o Leads teams performing producibility assessments of design concepts.
o Manage the program work statement making sure it meets the cost and schedules.
o Leads development of complex work statements and sequencing of events to support delivery commitments.
o Lead and work with, test Project Management, Design Engineering, and Program IE to develop and maintain integrated build plan.
o Provide build plan and help develop schedule.
o Close coordination with Design engineers and fabrication personnel, Lead coordination with procurement/supplier management personnel across the Systems lab test team and the DB organization.
o Drafts, updates and reviews processes and procedures to support business requirements.
o Works under minimal direction.
o Collaborate with Supplier Management to establish Flight test integration requirements and opportunities.
o Lead the creation of training material and tutorials for Design Build ME team.
Basic Qualifications (Required Skills/Experience):
o Bachelor, Master or Doctorate of Science degree from accredited course of study, in engineering, computer science, mathematics, physics or Chemistry.
o 5 years of experience working in a production and/or manufacturing environment.
o 3 years of experience leading or managing projects and/or teams.
o 5 years of experience in a Manufacturing Engineering role.
Preferred Qualifications (Desired Skills/Experience):
o 3 years of experience working in a lab test, flight test, or similar test environmento Experience in support of commercial and military customers.
o Experience in Project managemento Boeing BCA/BDS/BT&E Manufacturing Engineering experience in Flight Test.
o Experience in ME and processes across multiple engineering disciplineso Experience with PDM, CAPP, CMES, MESci, EPARTs, GOLDesp PDS Defense, Incis committed to working with and providing reasonable accommodation to individuals with physical and mental disabilitiesIf you need special assistance or an accommodation while seeking employment, please call 1-866-224-2745 to contact usWe will make a determination on your request for reasonable accommodation on a case-by-case basis.
The law requires PDS Defense, Incto post a notice describing the Federal laws prohibiting job discriminationFor information regarding your legal rights and protections, please click on the following links:
EEO is the Law and EEO is the Law Supplement PDS Defense, Incwill not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own payPlease see the Pay Transparency Nondiscrimination Provision for more information.
As a Federal Contractor, PDS Defense, Incis required to participate in the E-Verify Program to confirm eligibility to work in the United StatesFor information, please click on the following link:
E-Verify.
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit https:
//www.
pdsdefense.
com/candidate-privacy/ Recommended Skills Assessments Business Planning Business Requirements Chemistry Engineering Hardworking And Dedicated Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
